SDS

SAFETY DATA SHEET DGCTL201809140002A
Page 6 of 15 Version Number: V2.0
Precautions for safe
handling
Handling: In case of rupture. Use personal protection equipment. Avoid
contact with skin, eyes or clothing. Ensure adequate ventilation. Do not
breathe dust/fume/gas/mist/vapors/spray.
Conditions for safe
storage, including any
incompatibilities
Storage: Keep containers tightly closed in a dry, cool and well-ventilated
place.
Incompatible Products: Strong acids. Strong oxidizing agents. Strong
bases.
Section 8 – Exposure Controls and Personal Protection
Control parameters
Exposure Guidelines
Exposure
Guidelines
ACGIH TLV OSHA PEL NIOSH IDLH
Lithium Nickel Cobalt
Manganese Oxide
TWA: 0.02 mg/m³
Copper foil
7440-50-8
TWA:0.2mg/m³ fume
TWA:1mg/m³Cu dust and mist
TWA:0.1mg/m³fume
TWA:1mg/m³dust and mist
(vacated) TWA:0.1g/m³Cu
dust,fume,mist
IDLH:100mg/m³dust ,fume
and mist
TWA:1mg/m³dust and mist
TWA:0.1mg/m³ fume
Aluminum foil
7429-90-5
TWA: 1 mg/m
3
respirable
fraction
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
(vacated) TWA: 15 mg/m
3
Total dust
(vacated) TWA: 5 mg/m
3
respirable fraction
(vacated)
TWA: 5 mg/m
3
Al
Aluminum
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable dust
Graphite
7782-42-5
TWA: 2 mg/m³
respirable fraction all
forms except graphite fibers
TWA: 15 mg/m³ total dust
synthetic
TWA: 5 mg/m³ respirable
fraction
synthetic
(vacated) TWA: 2.5 mg/m³
respirable dust natural
(vacated) TWA: 10 mg/m³
total
dust synthetic
(vacated) TWA: 5 mg/m³
respirable fraction
synthetic
TWA: 15 mppcf natural
IDLH: 1250 mg/m³
TWA: 2.5 mg/m³ respirable
dust