Robot Vacuum Cleaner Quick Start Guide
1 Install the Charging Dock Place the Charing Dock against the wall. Connect the Adapter to Charging Dock and outlet. Leave an area on each side of Charging Dock (1x1x1.5m/3.3x3.3x5ft) 2 Wake up your Robot Remove the two protective foams on the both sides of body. 3.3ft 3.3ft t 5f Turn on the power switch at the side of body. I: ON O: OFF 3 a. Charging your Robot 2 ways to charge a. Use charging dock b. Use adpater directly b. Charging status: a. When charging, flashes (red). b.
4 a. Press on the robot to start directly. b. Press on the remote control to start directly. c. APP remote control 1 Download “Tecbot”. 2 Add a device after you register. TECBOT 3 Scan the QR code on the side of the body. 4 Connect to the WiFi (only support 2.4Ghz) 5 Connect to your Robot. 6 Start to clean/remote control/schedule. Press and hold the on the robot for 3~5s. When you hear a “ting” and light flashes, click “confirmed above” and Next.
ollow us Facebook: Tecbot Instagram: Tecbot Twitter: Tecbot Contact us Whatsapp: +86-13827222904 Email: service@tecbot.ai Website: en.tecbot.
