Technical Specifications

TEC
®
Ultimate 6 Plus Mortar Product Data
tecspecialty.com
H.B. Fuller Construction Products Inc.
1105 South Frontenac Street
Aurora, IL 60504-6451
©Copyright 2020 H.B. Fuller Construction Products Inc.
TEC
®
, TEC
®
logo, EZ Level
®
, AccuColor EFX
®
, Super Flex
™
,
XtraFlex
™
and Full Set Plus
®
are trademarks
of H.B. Fuller Construction Products Inc. DS487 R0820-20
For Gauged Porcelain Tile Panels/Slabs installation, reference the TEC
®
Thin Porcelain
Panel Installation Guide on tecspecialty.com.
Clean-up
Clean tools, hands, and excess materials from face of tile, while mortar is still fresh, with
warm soapy water.
Grouting/Curing
Grouting may be accomplished when tiles are held firmly in place, typically 6 hours after
installation is completed. No traffic is permitted over the tiles prior to grouting. Cold
temperatures or high humidity may extend curing time. Unglazed tiles may require sealing
prior to grouting so discolorations will not occur. The use of TEC
®
brand grouts is highly
recommended.
6. AVAILABILITY
TEC
®
Premium Tile and Stone Installation Products are available nationwide.
To locate TEC
®
products in your area, please contact:
Phone: [phone]
Website: tecspecialty.com
7. LIMITED WARRANTY
The product(s) covered by this Product Data Sheet are sold subject to a Limited
Warranty and related terms. H.B. Fuller Construction Products disclaims the
implied warranties of merchantability and fitness for a particular purpose
and all incidental and consequential damages arising out of the sale,
purchase or use of this product. For Limited Warranty details visit tecspecialty.com.
To obtain a hard copy of the Limited Warranty call H.B. Fuller Construction Products at
800-832-9023 or mail a written request to the address in Section 2 of this Product
Data Sheet.
8. MAINTENANCE
Not applicable
9. TECHNICAL SERVICES
Technical and safety literature
To acquire technical and safety literature, please visit our website at
tecspecialty.com.
10. FILING SYSTEM
Division 9
Conforms with LEED v4 low emitting interiors.
Compliant with (CDPH) Standard Method v1.2 VOC Emissions.