SDS

Page 3 of 7
PREMIUM WOOD FLOORING
ADHESIVE
Print Date: 07-19-2016 841400PM
SAFETY DATA SHEET
______________________________________________________________________________
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 7: HANDLING AND STORAGE
Handling: Avoid contacting and avoid breathing the material. Use only in a well ventilated
area.
This product contains an ingredient that may react with water or humidity to
release methanol (67-56-1). The TWA for methanol is 200 ppm.
Storage: Store in a cool, dry place.
Consult the Technical Data Sheet for specific storage instructions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS:
Chemical Name Note ACGIH EXPOSURE LIMITS OSHA PEL
Calcium carbonate * (see
below)
No data available. 15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Portland cement * (see
below)
1 mg/m3 TWA (particulate matter
containing no asbestos and <1% crystalline
silica, respirable fraction)
15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
Methyl alcohol 200 ppm TWA
250 ppm STEL
Skin absorption may potentially contribute
to the overall exposure to this material.
200 ppm TWA; 260 mg/m3 TWA
Diethylenetriamine 1 ppm TWA
Skin absorption may potentially contribute
to the overall exposure to this material.
Not established
*This product contains one or more materials that may be hazardous when present as an airborne dust. During normal handling of the product, the
material is encapsulated within the product and will not present an exposure risk. Once the product has reached its final state and is abraded or
disturbed, dusting and exposure may occur.
ENGINEERING CONTROL METHODS:
VENTILATION: Use local exhaust ventilation or other engineering controls to
minimize exposures.
EYE PROTECTION: Wear safety glasses with side shields when handling this product.
Wear additional eye protection such as chemical splash goggles
and/or face shield when the possibility exists for eye contact with
splashing or spraying liquid, or airborne material. Have an eye wash
station available.
SKIN PROTECTION: Avoid skin contact by wearing chemically resistant gloves and long
sleeved shirt. An apron may be appropriate if splashing can occur.
Skin absorption may potentially contribute to the overall exposure to
this material. Appropriate measures should be taken to prevent
absorption so that the TLV is not invalidated.
GLOVES: Nitrile
RESPIRATORY PROTECTION: Respiratory protection may be required to avoid overexposure when
handling this product. Use a respirator if general room ventilation is
not available or sufficient to eliminate symptoms. NIOSH approved
air purifying respirator with organic vapor cartridge and dust/mist