Installation Instructions
tecspecialty.com
H.B. Fuller Construction Products Inc.
1105 South Frontenac Street
Aurora, IL 60504-6451
TEC
®
Universal Pressure Sensitive Adhesive Product Data
©Copyright 2015 H.B. Fuller Construction Products Inc.
TEC
®
is a trademark of H.B. Fuller Construction Products Inc. DS747-retail N1015-1
Application
IMPORTANT: Refer to flooring manufacturer’s installation guidelines
for proper application instructions, including trowel size, approximate
coverage and roller weight. Apply adhesive and allow to dry to a clear,
transparent film - normally 1 to 2 hours before applying floor covering. However,
tiles may be installed up to 24 hours after adhesive becomes dry. Drying time
will vary depending upon the temperature, humidity and porosity of substrate. To
insure releasable properties, adhesive film should dry clear prior to installation. If
a permanent, non releasable bond is desired, place carpet, pad or sheet vinyl into
adhesive while it is still wet (before the color change). Keep the adhesive film free
of dust and dirt.
Open Time
TEC
®
Universal Pressure-Sensitive Flooring Adhesive has an approximate working
time of 1-24 hours, depending on trowel size, floor porosity, temperature and
humidity.
Clean-up
Remove wet adhesive with a water dampened cloth. Dried adhesive can be removed
with acetone.
6. AVAILABILITY
TEC
®
Premium Tile and Stone Installation Products are available nationwide.
To locate TEC
®
products in your area, please contact:
Phone: 800-832-9002
Website: tecspecialty.com
7. WARRANTY
For warranty details, see your sales associate or tecspecialty.com.
8. MAINTENANCE
Not applicable
9. TECHNICAL SERVICES
Technical assistance
Information is available by calling the Technical Support Hotline.
Toll Free: 800-832-9023
Fax: 630-952-1235
Technical and safety literature
To acquire technical and safety literature, please visit our website at
tecspecialty.com.
10. FILING SYSTEM
Division 9