SDS

Page 2 of 6
TEC WALL BASE ADHESIVE
Print Date: 10-29-2015 840446PM
SAFETY DATA SHEET
______________________________________________________________________________
SECTION 4: FIRST AID MEASURES
IF IN EYES: Flush eyes with plenty of water for at least 20 minutes retracting eyelids often. Tilt the head to
prevent chemical from transferring to the uncontaminated eye. Get immediate medical attention.
IF ON SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
IF INHALED: Remove to fresh air. Call a physician if symptoms persist.
IF SWALLOWED: Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care
provider with this MSDS.
SECTION 5: FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use water spray, foam, dry chemical or carbon dioxide.
UNUSUAL FIRE AND EXPLOSION HAZARDS: There is a possibility of pressure buildup in closed containers
when heated. Water spray may be used to cool the containers.
SPECIAL FIRE FIGHTING INSTRUCTIONS: Persons exposed to products of combustion should wear self-
contained breathing apparatus and full protective equipment.
HAZARDOUS COMBUSTION PRODUCTS: Carbon dioxide, Carbon monoxide Nitrogen containing gases
SECTION 6: ACCIDENTAL RELEASE MEASURES
SPECIAL PROTECTION: Exposure to the spilled material may be irritating or harmful. Follow
personal protective equipment recommendations found in Section 8 of
this MSDS. Additional precautions may be necessary based on special
circumstances created by the spill including; the material spilled, the
quantity of the spill, the area in which the spill occurred.
METHODS FOR CLEAN-UP: Dike if necessary, contain spill with inert absorbent and transfer to
containers for disposal. Keep spilled product out of sewers, watersheds,
or water systems.
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 7: HANDLING AND STORAGE
Handling: Avoid contacting and avoid breathing the material. Use only in a well ventilated
area.
Storage: Store in a cool, dry place.Protect from freezing
Consult the Technical Data Sheet for specific storage instructions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS:
Chemical Name Note ACGIH EXPOSURE LIMITS OSHA PEL
Kaolin clay * (see
below)
2 mg/m3 TWA (particulate matter
containing no asbestos and <1% crystalline
silica, respirable fraction)
15 mg/m3 TWA (total dust); 5 mg/m3 TWA
(respirable fraction)
*This product contains one or more materials that may be hazardous when present as an airborne dust. During normal handling of the product, the
material is encapsulated within the product and will not present an exposure risk. Once the product has reached its final state and is abraded or
disturbed, dusting and exposure may occur.