SDS
Page 1 of 6
TEC CARPET PAD ADHESIVE
Print Date: 10-28-2015 840444PM
SAFETY DATA SHEET
______________________________________________________________________________
REVISION DATE:
10-28-2015
SUPERSEDES:
None
SECTION 1: IDENTIFICATION OF THE PRODUCT AND SUPPLIER
PRODUCT INFORMATION
PRODUCT: TEC CARPET PAD ADHESIVE
PRODUCT DESCRIPTION: Mastic
INTENDED USE: Adhesive
PRODUCT IDENTIFIER: 840444PM
COMPANY INFORMATION
H.B. Fuller Construction Products Inc.
1105 S. Frontenac Street
Aurora, IL 60504
Phone: 1-800-552-6225
Medical Emergency Phone Number (24 Hours): 1-888-853-1758
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 2: HAZARDS IDENTIFICATION
GHS Hazard Symbols:
GHS Signal Word:
Danger
GHS Classification:
Skin Sensitisation Category 1; Carcinogenicity Category 1B
GHS Hazard Phrases:
May cause an allergic skin reaction.; May cause cancer.
GHS Precautions:
Safety Precautions:
Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Avoid breathing dust/fume/gas/mist/vapours/spray.
Contaminated work clothing should not be allowed out of the workplace. Wear
protective gloves/protective clothing/eye protection/face protection.
First Aid Measures:
IF ON SKIN: Wash with plenty of soap and water. IF exposed or concerned: Get
medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Storage:
Store locked up.
Disposal:
Dispose of contents/container in accordance with local/regional/national/international
regulation for hazardous wastes.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS # PERCENT Classification Note
Rosin/rosin derivatives 10 - 30
Skin Sens. 1; H317
Mineral oil 64741-96-4 10 - 30
Carc. 1B; H350
*This product contains one or more materials that may be hazardous when present as an airborne dust. During
normal handling of the product, the material is encapsulated within the product and will not present an exposure
risk. Once the product has reached its final state and is abraded or disturbed, dusting and exposure may occur.






