Installation Instructions

Product Data
Grout Colorant
1. PRODUCT NAME
TEC
®
Grout Colorant
(TA-505)
2. MANUFACTURER
H.B. Fuller Construction Products Inc.
1105 South Frontenac Street
Aurora, IL 60504-6451 U.S.A.
800.552.6225 Office
800.952.2368 Fax
tecspecialty.com
3. DESCRIPTION
TEC
®
Grout Colorant is designed to change color, seal and refresh sanded and
unsanded cement and epoxy grout joints. Interior or exterior use.
Key Features and Benefits
• Changes color, seal and refreshes grout joints
• For sanded and unsanded cement and epoxy grouts
• Interior or exterior use
Packaging
8 fl.oz. (237 mL) bottle
Color
Almond Antique White Birch Bright White
DeLorean Gray Light Buff Light Smoke Mist
Pearl Raven Sandstone Beige Silverado
Standard White Summer Wheat
Coverage
Up to 350 sq. ft. (32.5 m
2
) depending upon the size of tile and width of grout joint
for one coat application.
Storage
Close container after each use. Store in original container only. Keep in a dry,
well-ventilated area. Avoid freezing or long-term high temperature storage. DO
NOT THIN OR DILUTE.
Shelf Life
Maximum of 18 months from date of manufacture in unopened package.
Limitations
• Always test in a small inconspicuous area first.
Cautions
Read complete cautionary information printed on product container prior to use.
For medical emergency information, call 1-888-853-1758.
This Product Data Sheet has been prepared in good faith on the basis of information
available at the time of publication. It is intended to provide users with information
about and guidelines for the proper use and application of the covered TEC
®
brand
product(s) under normal environmental and working conditions. Because each
project is different, H.B. Fuller Construction Products Inc. cannot be responsible
for the consequences of variations in such conditions, or for unforeseen conditions.
4. TECHNICAL DATA
Physical Properties
TEC
®
Grout Colorant (TA-505)
Description
Physical State Liquid
Color Available in 14 colors
Initial Cure [at 72°F (22°C)] 3-4 hours
Final Cure 7-10 days
Storage
Close container after each use. Store in
original container only. Keep in a dry,
well-ventilated area. Avoid freezing or
long-term high temperature storage.
DO NOT THIN OR DILUTE.
Shelf Life
Maximum 18 months from date of
manufacture in properly stored,
unopened package.
5. INSTALLATION INSTRUCTIONS
Surface Preparation
Allow new grout installations to cure at least 48 hours or according to grout
manufacturer's cure time. Grout cure can be extended by environmental
conditions such as low temperature or high humidity. For heavily soiled, sealed,
or old grout, clean grout with a mild acid cleaner, or if acid sensitive tile or stone,
use an alkaline based cleaner.
Mixing
Use full strength. Do not thin or dilute.
Application
Shake well before using. Test in a small inconspicuous area prior to complete
application. Apply in small workable sections. Apply narrow bead of TEC
®
Grout
Colorant on the grout joint. Using a toothbrush, or similar applicator, spread
product evenly along grout joint with a scrubbing motion. While still wet, wipe
off excess from surrounding tile with a damp (not wet) towel or sponge. When
product is dry to touch (usually 30-60 minutes), lightly clean the tile with a damp
(not wet) towel or sponge to remove haze. Changing grout colors light to dark or
dark to light may require an extra application. Two thin coats are better than one
heavy coat.
Drying Time
Depends on temperature, humidity and hardness of the grout. Generally a second
coat may be applied after 30 minutes. Light foot traffic after 3-4 hours. Keep
grout dry and avoid heavy scrubbing for 7 to 10 days.
Maintenance
Use a suitable neutral PH tile and grout cleaner.
Expected Wear
Up to 15 years. Unusually heavy traffic patterns may require periodic touch up to
maintain uniform color and protection.
Clean-up
Clean tools, hands, and excess materials from face of tile, while grout colorant is
still fresh, with warm soapy water.
VOC 59 g/L