SDS

Page 3 of 6
TRIPLE FLEX PART A
Print Date: 06-10-2015 839239PM
SAFETY DATA SHEET
______________________________________________________________________________
Mineral oil No data available. 5 mg/m3 TWA (as mist)
Mineral oil No data available. 5 mg/m3 TWA (as mist)
ENGINEERING CONTROL METHODS:
VENTILATION: No exposure limits exist for the constituents of this product. No
engineering controls are likely to be required to maintain operator
comfort under normal conditions of use.
EYE PROTECTION: Wear safety glasses when handling this product.
SKIN PROTECTION: Not normally considered a skin hazard. Where use can result in skin
contact, practice good personal hygiene. Wash hands and other
exposed areas with mild soap and water before eating, drinking, and
when leaving work.
GLOVES: Not normally required. Use nitrile gloves if conditions warrant.
RESPIRATORY PROTECTION: No respiratory protection required under normal conditions of use.
Respirators should be selected by and used following requirements
found in OSHA's respirator standard (29 CFR 1910.134).
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
COLOR: White
ODOR: Mild Sweet
ODOR THRESHOLD: Not established
pH: 8.0
FREEZING/MELTING POINT (deg. C): Not established
BOILING POINT (deg. C): Not established
FLASH POINT: Non flammable
EVAPORATION RATE: Not established
FLAMMABILITY: Not a flammable solid or gas
UPPER EXPLOSIVE LIMIT (% in air): Not established
LOWER EXPLOSIVE LIMIT (% in air): Not established
VAPOR PRESSURE (mm Hg): Not established
VAPOR DENSITY: Not established
WEIGHT PER GALLON (lbs.): 8.58
SPECIFIC GRAVITY: 1.030
SOLUBILITY: Not established
OCTANOL/WATER COEFFICIENT: Not established
AUTOIGNITION TEMPERATURE: Not established
DECOMPOSITION TEMPERATURE: Not established
VISCOSITY: No data available.
SOLIDS (% by weight): 56.0
VOC, weight percent 0.00
SECTION 10: STABILITY AND REACTIVITY
STABILITY: Stable under normal conditions.
CHEMICAL INCOMPATIBILITY: Not established
HAZARDOUS POLYMERIZATION: Will not occur.