SDS

Page 2 of 6
TRIPLE FLEX PART A
Print Date: 06-10-2015 839239PM
SAFETY DATA SHEET
______________________________________________________________________________
Carc. 1B; H350
Unlisted ingredients are not 'hazardous' per the Occupational Safety and Health Administration Hazard
Communication Standard (29 CFR 1910.1200) and/or are not found on the Canadian Workplace Hazardous
Materials Information System ingredient disclosure list. See Section 8 for exposure limit guidelines.
SECTION 4: FIRST AID MEASURES
IF IN EYES: None expected to be needed, however, use an eye wash to remove a chemical from your eye
regardless of the level of hazard.
IF ON SKIN: Wash with soap and water.
IF INHALED: Remove individual to fresh air after an airborne exposure if any symptoms develop, as a
precautionary measure.
IF SWALLOWED: Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care
provider with this MSDS. Induced vomiting may lead to aspiration of the material into the lungs potentially causing
chemical pneumonitis that may be fatal.
SECTION 5: FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Use water spray, foam, dry chemical or carbon dioxide.
UNUSUAL FIRE AND EXPLOSION HAZARDS: There is a possibility of pressure buildup in closed containers
when heated. Water spray may be used to cool the containers.
SPECIAL FIRE FIGHTING INSTRUCTIONS: Persons exposed to products of combustion should wear self-
contained breathing apparatus and full protective equipment.
HAZARDOUS COMBUSTION PRODUCTS: Nitrogen containing gases
SECTION 6: ACCIDENTAL RELEASE MEASURES
SPECIAL PROTECTION: No adverse health effects expected from the clean-up of spilled material.
Follow personal protective equipment recommendations found in
Section 8 of this MSDS.
METHODS FOR CLEAN-UP: Dike if necessary, contain spill with inert absorbent and transfer to
containers for disposal. Keep spilled product out of sewers, watersheds,
or water systems.
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
SECTION 7: HANDLING AND STORAGE
Handling: No special handling instructions due to toxicity.
This product contains an ingredient that may release formaldehyde when in
contact with strong acids.
Storage: Store in a cool, dry place.Protect from freezing
Consult the Technical Data Sheet for specific storage instructions.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE LIMITS:
Chemical Name Note ACGIH EXPOSURE LIMITS OSHA PEL
Mineral oill No data available. 5 mg/m3 TWA (as mist)