Installation Instructions

TEC
®
Releasable Pressure Sensitive Adhesive Product Data
©Copyright 2020 H.B. Fuller Construction Products Inc. TEC
®
, TEC
®
logo and LiquiDam
™
are trademarks of H.B. Fuller Construction Products Inc. DS749 R1220-20
5. INSTALLATION INSTRUCTIONS
Application
For best results, flooring material, room and adhesive should be kept at a
minimum of 70°F (21°C) for 48 hours before and 24 hours after installation. Refer
to flooring manufacturers installation guidelines for proper application instructions,
including trowel size and approximate coverage. TEC Releasable Pressure-
Sensitive Adhesive has an approximate working time of 1-24 hours, depending
on trowel size, floor porosity, temperature and humidity. Apply adhesive and allow
to dry to a clear, transparent film - normally 1 to 2 hours before applying floor
covering. However, tiles may be installed up to 24 hours after adhesive becomes
dry. Drying time will vary depending upon the temperature and humidity. To insure
releasable properties, adhesive film should dry clear prior to installation. Keep the
adhesive film free of dust and dirt.
Clean-up
Remove wet adhesive with a water dampened cloth. Dried adhesive can be
removed with acetone.
6. AVAILABILITY
TEC
®
Premium Tile and Stone Installation Products are available nationwide.
To locate TEC
®
products in your area, please contact:
Phone: [phone]
Website: tecspecialty.com
7. LIMITED WARRANTY
The product(s) covered by this Product Data Sheet are sold subject to a Limited
Warranty and related terms. H.B. Fuller Construction Products disclaims the
implied warranties of merchantability and fitness for a particular purpose
and all incidental and consequential damages arising out of the sale,
purchase or use of this product. For Limited Warranty details visit tecspecialty.com.
To obtain a hard copy of the Limited Warranty call H.B. Fuller Construction Products at
800-832-9023 or mail a written request to the address in Section 2 of this Product
Data Sheet.
8. MAINTENANCE
Not applicable
9. TECHNICAL SERVICES
Technical and safety literature
To acquire technical and safety literature, please visit our website at
tecspecialty.com.
10. FILING SYSTEM
Division 9
Conforms with LEED v4 low emitting interiors.
Compliant with (CDPH) Standard Method v1.2 VOC Emissions.