User's Guide

USERS GUIDE

www.auroramm.com

Package Contents

Please make sure the following items are included within your package. Contact your dealer if any items are missing or

damaged.

TeamStream

TS-100

 1 TS-100 Base Unit

 1 TeamStream USB Disk

 1 12v Power Supply

 2 Wireless Antenna

Note: Go to www.auroramm.com for latest manual and firmware.

Initial Setup

1. Attach the two antennas to the rear of the TeamStream main unit. They are shipped unattached to prevent

damage to the TS-100 or the antennas.

2. Connect your display to the TS-100’s HDMI OUT port. If you are attaching external speakers, plug them into

the LINE OUT port.

3. Connect an Ethernet cable from your router/switch/LAN port to the LAN port on the rear of the TS-100. If

you are powering the device using PoE you do not need to connect a power supply.

4. Plug the 12V power supply into the rear of the TS-100 if you are not using PoE. The TS-100 should boot

immediately once power is connected.