User's Guide

10
USERS GUIDE
www.auroramm.com
Wireless Network Page
Wireless network configuration wizard
Sets up the wireless access point on the TS-100.
 Device Name – Host name of the device as well as the default SSID.
 Network Config – Sets the wireless mode of the TS-100.
o Wireless Direct Mode – Default. Devices connect directly to the TS-100.
o Wireless Infrastructure Mode – Uses two separate access points.
o LAN Infrastructure Mode – Devices connect to your local LAN to connect to the TS-100.
 Set Up Wi-Fi access point – Sets the properties of the hotspot.
o Frequency – Wireless band of the TS-100. 5GHz is recommended for better connection.
o Channel – Wireless channel the hotspot transmits on. Best channel automatically selected.
o Password – Sets the default WiFi password.
 Dual Network Config
o Connected Dual Network – Hotspot and LAN connection are bridged.
o Segmented Dual Network – Hotspot and LAN connection are separate.
 Guest and Staff SSID – Set the SSID for the guest and staff networks.
Show Device Name and Password When Mirroring
Always show the device name and password whenever a device is being shared.
Auto Change Password
Sets the lifetime of the connection password.
Disable Password Change Hint Dialog
Disables the on-screen password change notification.
WiFi Analyzer
Built-in tool to show SSIDs and channels of other wireless networks.
Hide SSID, Password, & IP in Status Bar
Hides the device information from the main wireless connection screen.