USERS GUIDE TeamStream TS-100 Quick Start Guide www.auroramm.
USERS GUIDE SAFETY INSTRUCTIONS Please review the following safety precautions. If this is the first time using this model, then read this manual before installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further instructions. The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage inside the product that may be sufficient to constitute a risk of electric shock to anyone opening the case.
USERS GUIDE FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
USERS GUIDE TABLE OF CONTENTS Package Contents .................................................................................................................................................... 6 Initial Setup ............................................................................................................................................................... 6 TS-100 Main Screen .......................................................................................................................
USERS GUIDE External Control ..................................................................................................................................................... 12 Controlling the TS-100 via LAN ......................................................................................................................... 12 Using the TS-100 To Control External Devices ................................................................................................. 12 Parameter ..................
USERS GUIDE Package Contents Please make sure the following items are included within your package. Contact your dealer if any items are missing or damaged. TeamStream TS-100 1 TS-100 Base Unit 1 TeamStream USB Disk 1 12v Power Supply 2 Wireless Antenna Note: Go to www.auroramm.com for latest manual and firmware. Initial Setup 1. Attach the two antennas to the rear of the TeamStream main unit. They are shipped unattached to prevent damage to the TS-100 or the antennas. 2.
USERS GUIDE TS-100 Main Screen ID Name Description 1 SSID This is the ID of the TeamStream device. 2 PASS (Password) This is the password to connect to the TS-100. 3 Refresh button Changes the password of the TS-100. 4 WiFi IP / LAN IP IP addresses to access the web interface of the TS-100. 5 Security Level Displays current security level. 6 Download Button Copies TeamStream software to a USB disk. 7 Wired source input Switches to local input mode for inputs HDMI1-3 and VGA.
USERS GUIDE Connecting to the TS-100 PC/Mac 1. Insert the TeamStream USB stick to your PC/Mac. If you do not have a USB stick, you can download the app by accessing the web interface of the TS-100. 2. Run the TeamStream app and connect to the SSID of the TS-100 you wish to connect to. 3. When prompted, enter the connection password shown on the main screen. 4. Click “Ready To Share” to share your screen. Android/iOS 1. Download the “WirelessMedia” app from the Google Play Store or the iOS App Store. 2.
USERS GUIDE Network and Device Settings To access the settings page, plug a wired mouse into one of the USB ports on the TS-100 and click the cog on the main screen. The default password is “admin”. Ethernet Page IP address The LAN IP address of the TS-100. Ethernet MAC address The MAC address of the LAN port. Proxy & IP settings Sets the Proxy and LAN IP Settings: Proxy – Set HTTP proxy settings. IP Setting – Select between DHCP and Static IP address settings.
USERS GUIDE Wireless Network Page Wireless network configuration wizard Sets up the wireless access point on the TS-100. Device Name – Host name of the device as well as the default SSID. Network Config – Sets the wireless mode of the TS-100. o Wireless Direct Mode – Default. Devices connect directly to the TS-100. o Wireless Infrastructure Mode – Uses two separate access points. o LAN Infrastructure Mode – Devices connect to your local LAN to connect to the TS-100.
USERS GUIDE General Settings Page Auto Copy Software Automatically copies the TeamStream software whenever a USB disk is connected. Auto Standby Sets the time for the TS-100 to enter standby automatically. HDMI Output Resolution Sets the output display resolution. Supports 1080p60, 4k30, and 4k60. Source Switch When Device Unplugged Sets the default source to switch to when a wired device is unplugged. HDMI Auto Switch Enables automatically switching to a newly plugged wired source.
USERS GUIDE External Control Controlling the TS-100 via LAN The TS-100 supports control via Telnet at port 5656. The full protocol guide is available on our website at www.auroramultimedia.com. Using the TS-100 To Control External Devices The TS-100 supports controlling external devices by RS-232. There are also 2 normally open relay connections available, as well as 2 GPIO input channels. To configure external control, open the settings page and go to the “External Control Setup” page.
USERS GUIDE Aurora Multimedia Corp. 205 Commercial Court | Morganville, NJ 07751 Phone: 732-591-5800 | Fax: 732-591-6801 13 www.auroramm.