Use and Care Manual

FIGURE 2
PAGE 2 OF 2
2
3
10
8
Step 2:
Insert the seat post (#3) into the hole located in
the center of the base assembly (#2). Fasten
them together by using bolt (#10) and washer
(#8). Make sure that all of the bolts have been
tightened completely.See Figure 2.
Note:
For ease with installation, we recommend that the
seat post (#3) be slightly oiled or waxed before
fastening to the base assembly (#2).
Caution:
To ensure one’s safety during use of this
swivel rocker chair, examine all of the bolts
to make sure that they are securely
fastened. This is a chair with swivel rocker
ability; therefore, use by young children
should be adult supervised.
FULL ASSEMBLY
#10 BOLT M6*40
Step 4:
See Full Assembly.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your swivel rocker chair.
• In order to prolong the life and beauty of your swivel rocker chair, we recommend that it be stored in a dry and
protected area during off season periods.