Use and Care Manual

FIGURE 1
PT- OF0003
PARTS LIST
MATERIAL CODE PART Q’TY
PART
NO.
MATERIAL CODE PART Q’TY
PART
NO.
1
2
3
4
5
6
7
8
AT5047-58-01
BASE ASSEMBLY
SEAT POST
WASHER d6.5*D30*3.0
WASHER
SEAT ASSEMBLY
9
10
11
12
1
1
1
8
4
4
2
1
1
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure proper
assembly.
PAGE 1 OF 2
48
1
4
4
6
6
6
6
9
9
5
3
1
Step 1:
Place the seat assembly (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Fasten the seat post (#3) to the brace of
the seat assembly (#1) by using bolts (#4),
washers (# ,#7 and #9) and jam nuts (# ).
See Figure 1.
Use the correct bolts as indicated. Do not tighten any of the bolts until the swivel rocker
chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
!
!
!
!
4
AT5047-58-02
AT5047-58-03
AT5047-58-04
AT5047-58-05
AT5047-58-06
AT5047-58-07
1
BOLT M8*48
JAM NUT M8*1.25
WASHER d8.5*D17*1.6
WASHER d8.5*D12*2.1
AT5047-58-08
AT5047-58-09
AT5047-58-10
AT5047-58-11
AT5047-58-12
BOLT M6*40
NUT WRENCH
HE KEY WRZNCH 6MM
7
7
5
3
#4 BOLT M8*48
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.