COMPONENTS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION | QTY A & TOP PANEL | 1PC H BOSOM tpe | K / UPPER BACK RAIL | 1PC D & FIXED SHELF UPPER FRONT RAIL| PG E < stablemate SHELF| 1PC | M / BOTTOM RAIL | 1PC F < BOTTOM PANEL | 1PC | N U BACK PANEL | PCS 8 % LEFT DOOR BACK PANEL | 1PG H g RIGHT DOOR | 1PC | P \ PLASTIC BAR | PCS
HARDWARE & TOOLS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION | @QTY 1 Qfi CAM LOCK | 16PCS| ¢ & SHELF PIN | PCS $15¥12 2 6@ CAM BOLT | 16PCS| 10 g SHORT BOLT | PCS 3 % WOODEN DOWEL | PCS | 11 SCREW PCS 830 $3IF12 4 gy SCREW PCS | 12 %@ ANCHOR PCS P32 D=7 5 ~ BOLT P65 | 14 SCREW PCS Wam 6 % LONG BOLT | PCS | 15 ) DOOR KNOB | PCS / TEMPLATE PAPER TOOL NEEDED: SUGGESTION: PHILIPS SCREWDRIVER REQUIRED i q « HOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS:! 1.
1 S 4 PG SQ #1542 2 M 4 PCS 3 e STEP 1: 1. Screw cam bolts (2) into panel B & C and insert dowels (3). 2. Attach panel D to panels B & C and secure with cam locks (1).
STEP 2: 1. Screw cam bolts (2) and insert dowels (3) into panel F. 2. Attach panel F to panel B & C with securing cam locks (1). 3.
1 o 4 PCS P54z 2 PCS STEP 3: 1. Insert dowels (3) to the tops Attach panel A to panel B & C with securing cam locks (1).
4 4 20 PCS #3207 g STEP 4: 1. Attach panels N to the back of cabinet and secure the four corners with screws (4). 2. Attach panel O between the two panels N and insert plastic bar P with securing screws {4).
2 PoS 1 8 PCS 2 PCS STEP 5: 1. Attach knobs (15) to doors G & H with bolts (5). 2. Attach doors panels B & C with screws (11).
STEP 7: 1. Insert dowels (3) to the tops Attach rail M to parts | & J with securing bolts (10). 3. Rest the top of the space scare on bottom frame and secure with bolts (6).
