COMPONENTS PART FIGURE DESCRIPTION | OTY | PART FIGURE DESCRIPTION | GTY A fl LEFT SIDE PANEL| 1PC | & 0 DRAWER FACE | 1PC B gl PIT SIDE PANEL| 1PC | H 0 DRAWER FACE | 1PC ยข << BOTTOM PANEL | 1PC Z er amy | 27Cs D << MIDDLE SHELF apes E 0 BACK PANEL | 1PC | K q DARNER BACK PCs F << TOP PANEL DRAWER BOTTOM | pogrom PANEL
HARDWARE & TOOLS PART FIGURE DESCRIPTION QTY | PART FIGURE DESCRIPTION | QTY 1 o> CAM BOLT | 20PCS| 7 <9 WHEEL PCS 2 S CAM LOCK | 20Pcs| 8 @ WHEEL WITH BRAKE| PCS 3 WOODEN DOWEL | 20PCS| 9 Sig SCREW PCS x, $3%12 D=6 4 * SCREW PCS | 10 3 KNOB PCS $4425 D-8 5 TOWER BAR | 1PC | 11 a, SCREW BOLT | PCS 94%20 D-9 6 xy, SCREW BOLT | PCS | 12 DRAWER STOPPER | PCS $4520 D=9 TOOL NEEDED: SUGGESTION: PHILIPS SCREWDRIVER REQUIRED ~MOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS: 1.
STEP 1: 1. Screw cam bolts (1) into panel Screw Tower bar (5) to panel B with screw bolts (6). 3. Attach pane! panel A & B with dowels (3) and secure with cam locks (2) as indicated.
STEP 2: 1. Slide the panel E into the assembled cabins. 2. Screw cam bolts (1) into panel F. 3. Attach panel F to the top of panel A & B with dowels (3) and secure with cam locks (2) as indicated. 4.
STEP 3: 1. Screw cam bolts (1) to panel Attach panel K with dowels (3) and secure with screws (4) as indicated. 3. Attach panel G to panel |, JL with dowels (3) and secure with cam locks (2) as indicated. 4. Attach panel H to panel |, J ,L with dowels (3) and secure with cam locks (2) as indicated. 5. Slide the assembled drawers to the cabinet with drawer stopper (12).
