WiFi BORESCOPE INSTRUCTION MANUAL A WiFi Indicator Red : POWER ON Green : WiFi Connecting I A B TV out To switch live view to TV B L OW F C Charging Port E D G C D Charging Indicator Orange : Charging Indicator Off : Fully charged E Battery Low Indicator Red : Battery low F Power ON / OFF & LED Brightness Adjustment for I G Battery Compartment 2300 mAh of rechargeable Lithium Battery is embedded H Flexible tube I Camera and LEDs 1 H
Accessories part List J Mirror N K Hook L Magnet M TV Cable To switch live view to TV N USB charging Cable Using N + iPad or iPhone Power Adapter to charge the unit.
Pls following User Guide below: Step 1: Charging Using N + iPhone or iPad Power Adapter to charge the unit. It takes about 7 hrs for fully charged. Step 2: Download APP Download iBORESCOPE fm App Store on iPhone / iPad. Step 3: Turn ON TF3003WX Red WiFi Indicator A means POWER ON. Green WiFi Indicator A means WiFi Connecting. It takes about 30 seconds to get WiFi Connected. Step 4: 4.1 Turn on iPhone / iPad. 4.2 Setting 4.3 Wi Fi 4.4 iBORESCOPE 4.
.6 Touch iBORESCOPE Returning to main menu to touch iBORESCOPE ICON below Step 5: CONTROL LAYOUT (ON YOUR DEVICE’S TOUCH-SCREEN) O P Q 4
To start live view O To stop live view To play live view P To pause live view To take photos. The captured photos will be saved Q under photo folder on your iPhone / iPad.
Further Setting Touch to go back original Default Original Default : iBORESCOPE Original Default : 12345678 You are allowed to change the Default WiFi SSID & WiFi Password by using digits 0 – 9 and letters A – Z, minimum 8 numbers.
Brightness Adjust brightness Contrast Adjust contrast Hue Adjust hue Saturation Adjust saturation IMPORTANT SAFETY INSTRUCTIONS All of the safety and operating instructions should be read, adhered to and followed before the unit is operated. WARNING 1. Close supervision is necessary when this unit is used by or near children or mentally disabled individuals. 2. Use this unit only for its intended use as described in this manual.
3. The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves or other units that produce heat. Product Specifications Image Sensor 1/9” VGA CMOS Video Resolution 640 x 480 (VGA) Frame Rate 25fps (VGA on iPhone / iPad) Video Streaming Format MPEG4 Operation Temperature 0 ~ 45℃ iPad / iPad2 / iPhone3GS / iPhone4 / Mobile Surveillance iPhone 4S Security WEP(WiFi) Password Setup Camera Lighting 2 white LEDs Camera Ф 9.
FCC INFORMATION FCC ID : N3ITF3003WX This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.