Operation Manual


Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
11 TEAM SFC 2 - 100622
Assembly page 11/40
Fax [phone]
When used correctly the steam cleaner can kill dust mites and some types of bacteria, such as
salmonella and E. coli.
To disinfect a specific area, position the steam cleaner over the area for a minimum of eight
seconds. The steam temperature will reach to approximately 100°C (212°F). Use this procedure
to disinfect floors near: bathroom stools, kitchen counters, pet sleeping quarters, etc.
INSTRUCTIONS FOR USE
The steamer is designed to thoroughly clean floor surfaces, such as marble, ceramic, stone,
linoleum, sealed hard wood floors and parquet.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX, THE WAX MAY BE REMOVED BY
THE HEAT AND STEAM ACTION. DO NOT USE ON UNSEALED WOOD FLOORS AND DO
NOT LET THE UNIT STAND ON ANY WOOD FLOOR FOR AN EXTENDED PERIOD OF TIME.
THIS COULD CAUSE THE WOOD GRAIN TO RISE. IT IS THEREFORE RECOMMENDED THAT
A SAMPLE CLEANSING BE CARRIED OUT ON AN ISOLATED AREA OF THE FLOOR. IT IS
ALSO RECOMMENDED THAT YOU CHECK THE USE AND CARE INSTRUCTIONS OF THE
SURFACE FROM THE FLOOR MANUFACTURER TO ENSURE SUITABILITY TO STEAM
CLEANING.
HOW TO ASSEMBLE AND USE
1) Insert the steamer head onto the steamer body.
2) Secure the steamer head with the small Philips head screws until fully tightened (only
before first use).
3) Push the steamer handle straight up by pressing firmly on the unfolding handle button.
4) Pull the cloth pad over the steamer head. Pull the clip of the cloth towards the steamer
head.