Radon Pro V4.1 ESC - Manual

8
◎ The PC interface software(v5.0) downloaded website:
https://drive.google.com/file/d/1ZOb63tXcpNGBW5ixodgV0DN6ewayKHHR/view?usp
=sharing
◎ The LCD program card firmware(V5.0) downloaded website:
https://drive.google.com/file/d/1PU4I4TTU7qXUv3ZxLoG4zf1SAowbuwhz/view?usp
=sharing
or it can be downloaded from the www.team-powers.com home page directly.
◎Support Window System: Windows 7, Windows 8 and Windows 10
How to program the mode function setting through PC interface:
◎ Unzip TP_Radon USB link V5.0.rar and Install TP_Radon USB link V5.0.ext
program according to the installed instruction
◎ Use method 1 or 2 to connect the speed control to PC through the USB wire
◎ Press “Radon Software” icon to open the Radon PC program interface. If the
setting card or usb device is connected to PC properly, the “USB”and “ESC”icon
will be lighted up. That mean all mode setting is uploaded to PC and ready for
adjustment.
◎ If it is using the setting card to connect to PC, it needs to connect the external 2cell
(7.4V) battery. After the speed control power is on, if the PC interface is connected
with the speed control properly, USB”and “ESC”icon will be lighted up. That
mean all mode setting is uploaded to PC and ready for adjustment.
◎ After all mode setting is set, press “Update Setting” icon to update the settings
Point to Notes:
◎ Press “Reset to default” icon to reset all mode setting values to factory default setting
◎ Press “Firmware update” icon to upgrade the speed control firmware code
◎
Ab
ll h d i d i i
ibidhhhCif