Radon Pro V4.1 ESC - Manual

7. LED Indicators:

Step 2: How to program the mode function setting through the setting card:

◎ Press the Mode key to select the mode setting

◎ Press the Item key to select the mode setting values

◎ Press the Update key to update each setting values of each mode

◎ Press the Reset key to restore all mode setting to factory default setting

◎ Press and hold the Mode and Item key together for around 2s will enter to Data Analysis

mode which can be reviewed RPM, Low voltage and ESC temperature

◎ If RED Led is flashing but keep light up the BLUE Led when the speed control is in the

run, that mean the Low Voltage function is activated and reduce the power to the motor. It

show the battery is lower than expected value..

◎ If BLUE+RED is flashing together when the speed control is in the run, that mean the

Overheat Protection is activated, the speed control will cut around 50% power delivery to the

motor to avoid the burning problem.

◎ If BLUE LED keep blinking at neutral position, it indicates it is in Zero Timing /Blinking

Mode.