Mini-Z M-Radon V2.1 Mode Description

Brake Freq High frequency value have smooth brake feeling. Low value
have aggressive brake feeling
Limit Power To set how much power to limit in the throttle range
Brake Curve To select the linear or custom brake curve. For higher rpm
motor, the brake may not be enough and it is suggested to use
custom curve to change the brake curve to increase the brake
power delivery to the motor
Limit Power Range To set the throttle range to limit the power
Boost: Data Analysis:
Min Battery Voltage
To show the minimum battery voltage when in the running
Boost Timing It is the boost timing to the motor when the boost trigger level
is achieved. For higher value, it can increase more power to the
motor. The max boost timing+ turbo timing is 64degree
Max ESC Temp To show the esc maximum temperature when in the running
Boost Trigger Level To set where to trigger the boost timing position. Having higher
value will be more advance to trigger the boost timing start up
Max Motor RPM To show the motor maximum rpm when in the running
Boost Trigger Rate To set how fast to open all boost timing up. Having higher
value will be more advance to open all boost timing up
Update Setting:
After update setting is pressed, all updated setting will be downloaded to the esc at
once
Turbo: Reset Factory Setting:
After reset factory setting is pressed, all default setting will be downloaded to the esc
at once
Turbo Timing It is the turbo timing to the motor. For higher value turbo
timing, it can increase more power to the motor
The max boost timing+ turbo timing is 64degree
Firmware Update:
Start RPM It is the RPM to start the turbo boost timing. It can be selected
by the activation method
Device To show the device information
Turbo Delay It is the delay time to start up the turbo timing after the
activation condition is achieved. Higher value will have more
delay to start up the turbo timing function
Hardware To show the hardware information
Activation Method If ‘start rpm + full throttle” is selected, that mean the turbo
timing will be activated when rpm is achieved and throttle is
at full position. If “full throttle” is selected, that mean the turbo
timing will be activated only when the throttle is in full
position and the turbo delay time is achieved
Software To show the software version
Turbo Rate “On” Slope To control how fast to open all turbo timing up. Having higher
value will be more advance to open all turbo timing up
Information To show any further information about that esc