Mini-Z M-Radon V2.1 Instruction Manual

8
◎ The PC interface software(v3.0) downloaded website:
Go http://www.team-powers.com/index.php?thispage=download and download
“TP Radon USB link V3.0”.
◎Support Window System: XP SP2, Windows7 and Windows8
How to program the mode function setting through PC interface:
◎ Unzip TP_Radon USB link V3.0.rar and Install TP_Radon USB link V3.0.ext
program according to the installed instruction
◎ Use method 1 or 2 to connect the speed control to PC through the USB wire
◎ Press “Radon Software” icon to open the Radon PC program interface. If the
setting card or usb device is connected to PC properly, the “USB”and “ESC”icon
will be lighted up. That mean all mode setting is uploaded to PC and ready for
adjustment.
◎ If it is using the setting card to connect to PC, it needs to connect the external 2cell
(7.4V) battery. After the speed control power is on, if the PC interface is connected
with the speed control properly, USB”and “ESC”icon will be lighted up. That
mean all mode setting is uploaded to PC and ready for adjustment.
◎ After all mode setting is set, press “Update Setting” icon to update the settings
Point to Notes:
◎ Press “Reset to default” icon to reset all mode setting values to factory default setting
◎ Press “Firmware update” icon to upgrade the speed control firmware code
◎ About all other mode setting descriptions, it can be reviewed through the PC interface
descriptions.