Mini-Z M-Radon V2.1 Instruction Manual

6
7. LED Indicators:
Step 2: How to program the mode function setting through the setting card:
◎ Press the Item key to select the item setting
◎ Press the Value key to select the item setting values
◎ Press the Update key to update each setting values of each item
◎ Press the Reset key to restore all mode setting to factory default setting
◎ Press and hold the Menu and Value key together for around 2s will enter to Data Analysis
mode which can be reviewed RPM, Low voltage and ESC temperature (for LCD card only)
◎ If RED Led is flashing when the speed control is in the run, that mean the Low Voltage
function is activated and reduce the power to the motor. It show the battery is lower than
expected value..
◎ If BLUE+RED is flashing when the speed control is in the run, that mean the Overheat
Protection is activated, the speed control will cut around 50% power delivery to the motor to
avoid the burning problem.
◎ If BLUE LED keep blinking at neutral position, it indicates it is in Zero Timing /Blinking
Mode.