Mini-Z M-Radon V2.1 Instruction Manual

6. Program Card Specifications:

＊ Dimension: 70mm(L) x 45(W) x 13mm(H)

＊ Weight: ~23g

Program Card Operation:

LED Card Picture:

Step 1: Connection with Speed control:

◎Switch off the speed control power and take out the speed control BEC wire from the

receiver.

◎Connect the speed control BEC wire to the LED card connector.

Please make sure the speed control wire is connected properly based on the below description.

- Connect BEC white color wire to the program card pin at (‘S’) position.

- Connect BEC red color wire to the program card pin at (‘+’) position.

- Connect BEC black color wire to the program card pin at (‘-’) position.

◎Connect the battery to the speed control and turn on the unit. From the start, Item 1 & Value

1 number will be shown on LED display that show it is ready to program each mode setting

values.