Instruction manual

leave this setting on “auto calculate”.

› Setting value from 2 to 6 cells 22.2V and auto-calculate

(default auto calculate)

14. BEC Voltage

This parameter sets the voltage output of the ESC BEC

system that powers the electronics on your car. WARNING!

Using 7.2V will increase the servo performance but requires

compatible electronics (regular electronics only work with

6V). Using 7.2V with 6V electronics can damage them.

› Setting value 6V or 7.2V (default 6V)

RESTORE DEFAULT SETTINGS

With the ESC powered ON and the throttle in the neutral

position, press and hold the “SET” key for 5 seconds, the red

and green LED will ash simultaneously indicating that the

parameters have been reset to the factory default values.

PROGRAM BOX

The optional program box allows you to modify all of the ESC

parameters and to modify/update the ESC rmware (via the

PC software). It is the ideal way to adjust your ESC.

• The program box is required to use the ESC in conjunction

with the PC software.

• The program box rmware is independent from the ESC

rmware. You may need to update the program box or

ESC rmware via the PC software so that they can work

together.