Datasheet
37
Crawler,
under control!
The Crawler ESC and it's 21.5T Vortex Race Sensored Motor were specifically designed for Crawlers. With this
set you are always in control, no matter the situation.
Brushless Systems | Crawler
Vortex Crawler Combo
ORI66011
Fahrzeit
Hobby
The Team Orion Crawler Brushless-Set has been specifically designed for
use inside Crawler cars. The set is made of a 21.5T Vortex Race sensored
brushless motor and a Vortex 1:10 70A ESC with special software. The 21.5T
sensored motor has a very high torque and thanks to the sensors it runs
very smoothly and precisely. Combined with the special ESC software, this
set gives you perfect control over your Crawler car in any situation.
Vortex Crawler Brushless Sensored Motor
ORI28143
Vortex Crawler ESC
ORI65015
ESC (ORI65015):
Rated current: 70A constant, 360A peak; Low
voltage cut-off: 4.0V - NiMH/NiCd, 3.0V/cell
LiPoLiFe; Dimensions: 43x42x40mm;
Weight: 102g
Motor (ORI28143):
Input: 6-8 cells NiMH/NiCd, 2-3 cells LiPo/LiFe;
Current draw: 20A; Peak current: 30A; No load
current: 0,7A; RPM/V: 1320KV; Shaft lenght
16mm; Shaft diameter: Ø 3,175mm;
Dimensions: 36x51mm; Weight: 181g