User Manual

26
STEP G
Completed Chassis Assembly
STEP G-03
q
Painting the Body
STEP G-04
q
Painting:
Prepare the Lexan Body for painting by washing it thoroughly (inside and out) with warm water and liquid detergent. Dry the body with a clean,
softcloth.Usethesuppliedwindowmaskstocoverthewindowsfromtheinside.Ahigh-qualitymaskingtapeshouldbeusedontheinsideofthe
bodytomaskoanystripes,panels,ordesignsthatyouwishtopaintonthebody.UseacryliclacquerorotherpaintsrecommendedforLexan
(polycarbonate). (NOTE: LEXAN RC CAR BODIES ARE MEANT TO BE PAINTED FROM THE INSIDE!) Apply paint to the inside of the Body. Remove the
masking tape for the next color and continue. Try to use darker colors rst. If you use a dark color after a light color, apply a coat of white paint over
the lighter color before applying the darker color, or if you are painting over white, coat it with silver. This will help prevent the darker color from
bleeding through the lighter color.
Mounting:
The body is already cut out for mounting. However you will need to cut out the area for the pipe stinger. This should be done before you paint your
body so you can easily see where it exactly needs trimmed.
Stickers:
Afterthebodyismounted,REMOVETHEPROTECTIVEFILMONTHEOUTERSURFACE,nowyoucanapplythestickers.