User Manual

23
Servo Horn Installation
STEP F-05
q
ESC Installation
STEP F-06
q
STEP F
BOTTOM VIEW
4-40 x 1/2"
A6256
x 4
ESC Receiver Lead
RouteUnder
Wire Hooks
Speed Control Lead
to Receiver
Route Signal Wire and
Switch Wire through Clips
on Bottom
B9384
Battery Lead with EC5 Connector
B9364
Switch, 1/8th Xcelorin
B9368
Signal Wire, 1/8th Xcelorin
B9516
1/8 Scale Excelorin
Sensorless ESC
A4461
Battery Tray
Speed Control Lead
to Receiver
A4463
Battery Strap
Supplied with Servo
(not included)
Ensure the servo gear is centered
before attaching the Servo
Horns. This is best accomplished
by connecting the servo to the
radio system and setting the trim
to center.
Tip: If you are using a metal output splined
servo be sure to use Losi Lok on the screw.