TBS Vendetta Manual

Updating COLIBRI FC firmware

Getting the latest firmware flashed via TBS AGENT is a fast and easy process.

1. Install the latest STM32 VCP drivers: http://www.st.com/web/en/catalog/tools/PF257938

2. Open TBS Agent and click on the “COLIBRI” tab

3. Press and hold the “BOOT”-button on the COLIBRI board while connecting the micro-USB cable to the

side of the main assembly to enter DFU programming-mode

4. Select a firmware from the drop-down menu that is made for the VENDETTA only and click

“UPDATE” - the process should finish within 15 seconds. These firmwares include tuned settings.

5. Restore VENDETTA factory settings for the particular firmware version in CleanFlight/BetaFlight by

hitting “Reset Settings” on the first “Setup”-tab. Now, setup flight modes, beeper and LEDs again.