TBS Vendetta Manual

Firmware upgrade

Updates to the transmitter and receiver are applied using our TBS AGENT software. This takes care of all the

downloading of the latest firmware, verification- and upgrade process.

Installing TBS Agent

Download the installer from http://www.team-blacksheep.com/corepro/agent (Windows7/8, 64-bit required) -

no drivers needed to use the application, but an Internet connection is required to download the latest

firmware versions.

Plug in the device, start the TBS Agent, and wait for the latest firmware to download. Then click on “UPDATE”

to proceed.

You have the chance to try beta and early releases by hitting F1 on the keyboard and checking off the option

in the dialog box.

Updating CORE PRO

The USB connector for the CORE PRO is hidden inside the VENDETTA body and you need to open the body.

1. Open the frame and slide out the body assembly to get access to the CORE PRO in the rear section

2. Release the two tapes holding the CORE PRO in place to get access to the micro-USB connector

3. Open TBS AGENT and connect the USB cable, select the desired version and hit “Update”