TBS Vendetta Manual

OSD configuration

The VENDETTA OSD is built around the full-fledged TBS CORE PRO OSD and detailed description of all the

parameters is outlined in the official manual: http://www.team-blacksheep.com/tbs-core-pro-manual.pdf

The following is a concise summary specific for the VENDETTA.

On-Screen Display

● Units (GPS required) - Standard unit to use on the OSD

○ Speed - Metric (km/h), Imperial (mi/h), Knots (kts/h)

○ Distance - Metric (m), Imperial (ft)

○ Altitude - Metric (m), Imperial (ft)

● RSSI - Received Signal Strength Indicator signal from the receiver (if connected physically)

○ Source - Off/CrossFire/EzUHF OSD Link/Digital (PWM)/Analog (voltage) - RSSI signal source

type

○ Alarm - Enable/Disable - Display a textual warning and the RSSI read-out will blink when the

signal is critical

● Battery - Power system monitoring

○ Alarm - Enable/Disable - Show warning when battery voltage crosses critical level

○ Level Input - Auto/Manual - How to detect the number of battery cells/voltage

○ Warning Level - 0.0 to 99.9V - Set the threshold when a low voltage alarm should trigger

○ Curr. Correction - 50 to 250% - Calibrate your current sensor if it is a little off. e.g. your fly a

battery and the OSD shows you you used 1000mAh but your charger let you charge

1200mAh, so you can set this value to 120% and the reading will match on the next flight

○ Backup Voltage - Disable/Enable - Enables the backup battery, if connected, so the OSD/GPS

can run while the rest of the system is down, e.g. to recover a downed aircraft

● General - OSD specific settings

○ Show Position - No/Yes - Display the GPS coordinates on the bottom of the screen, update

rate 1Hz - useful while watching a DVR recording to recover a downed aircraft

○ Show Heading - No/Yes - Show heading arrow pointing towards “home” base

○ Show Sats - Hide on fix/Always - Number of GPS satellites available and locked

○ OSD Color - White/Black - Color of text and outline, i.e. white core and black outline/glow

○ Power Index - Off / mAh/Min / mWh/Km mWh/Mi / mAh/Km mAh/Mi - Running indicator of

power economy

○ Warn. Show Time - 0.5 to 60.0 Seconds - Duration of how long warnings stay on the screen,

default for racers target is 0.8s and 2.5s for every other target

○ Summary Style - TBS/PAO/Off - End of flight summary screen layout, TBS style with

judgement or without (PAO)

○ Audio Telemetry - Off/ImmersionRC - When you do not use TBS UNIFY, the TELM solder

bridge closed and ImmersionRC decoder is attached to the VRX