TBS Vendetta Manual

Changing VTX power level

The default VTX power level is 25mW and is fine for all close proximity flight where there is no other FPV

pilots around. In order to unlock higher power levels, you need to change your HAM callsign. Please note

that this requires a HAM license in most countries, which you are obligated to obtain before increasing the

power levels or switching to non-approved frequencies.

1. Go into the OSD and navigate to “VIDEO TRANSMITTER” and “UNLOCK VTX”

2. Change the callsign from the default “TBS”

3. Return to the “VIDEO TRANSMITTER menu and change to “VTX POWER LEVEL”

4. The transmitter power can be changed from 25mW all the way up to 800mW

For racing recommended power is maximum 200mW to avoid interference with other FPV pilots. Power levels

above this is only recommended when flying alone in wide open spaces.

COLIBRI FC configuration

The VENDETTA comes preconfigured with tuned CleanFlight settings and test flown. Changing the essential

flight controller settings such as PID, rates, filters, general settings and accelerometer calibration can be

made using the OSD in the field, or via the USB interface.

Changing settings via OSD:

1. Go to the “FLIGHT CONTROLLER” menu in the OSD

2. Select either “PID”, “RATES”, “GENERAL, “CALIBRATION” or “FILTERS”

Changing settings via USB:

1. Connect a micro-USB cable to the slot on the right-side of the VENDETTA

2. Download the CleanFlight/BetaFlight app from the Google Chrome Web Store

3. Click “Connect” to get access to all the settings