TBS Vendetta Manual

Putting on propellers

The provided propellers has two rotational profiles, counter-clockwise and clockwise. Getting these right is

important for a safe and proper first flight. The kit comes with two sets of three-blade 5x4-inch propellers.

1. Separate the propellers into two batches, with the letters facing up; counter-clockwise and clockwise

2. Use the picture above to install the propellers on the motor shafts and use the provided M5 locking

nuts to securing them in place. An easy way to remember the rotation is that the 

leading-edge

/tip of

the two front propellers always face each other and likewise on the tip of the two rear propellers.