TBS Unify Pro HV 5.8GHZ VTX - Manual V2
OSD control via CORE PRO
The TBS UNIFY PRO was built with the TBS CORE PRO in mind. Controlling your drone via the R/C joystick
was a concept first introduced by the BrainFPV FC. TBS has extended this functionality to the entire
POWERCUBE, allowing you to change not only the flight controller settings but also the UNIFY video
transmitter channels and output power.
In order for the CORE PRO to detect the video transmitter, the CORE PRO must be equipped with TBS
SmartAudio technology. You are most likely in luck and as we have rolled this out on the CORE PRO long
before we ever made the video transmitters. Unfortunately, there is no real way to know if your CORE PRO
is compatible. The first batch, 3rd batch and all subsequent batches are compatible, but it is hard to know
if your CORE PRO supports TBS SmartAudio without plugging in the video transmitter. If your CORE PRO
does not support TBS SmartAudio, you can either get a new one or open up a ticket with us to have it sent
to one of our service stations around the globe to have it revised for free.
Channel, Band and Power control
If your CORE PRO supports TBS SmartAudio and
the TBS UNIFY PRO is plugged in, you will see the
“VIDEO TRANSMITTER” setting in the main OSD
menu:
The menu itself is very straightforward, allowing
you to choose Channel, Band and Output power. A
HAM Callsign is required to enter high power
modes or use frequencies outside the ISM band.
9