TBS Unify Pro HV 5.8GHZ VTX - Manual V2



Video transmitter pinout
TBS UNIFY PRO 5G8
Despite being plug and play with the TBS CORE , TBS CORE PNP PRO , PNP25, PNP50 - the UNIFY PRO can
also be directly soldered to cameras or custom power distribution boards.
See the pin-out below:

TBS UNIFY PRO 5G8 HV (RACE)
The UNIFY PRO 5G8 HV comes with wires ready to be assembled into your own projects. Should you want
to connect it to TBS products such as the TBS CORE , TBS CORE PNP PRO, PNP25/PNP50, etc, you will need
to modify the camera pin-out to match the UNIFY VTx input socket. You will also need to remove the red
wire (5V) from the connector, to avoid voltage supplies fighting each other.
Connection to DIY drone build
Connection to TBS CORE products








11
