TBS Unify Pro HV 5.8GHZ VTX

TBS CORE PRO Control

The TBS UNIFY PRO was built with the TBS CORE PRO in mind. Controlling your drone via the R/C joystick was

a concept first introduced by the BrainFPV FC. TBS has extended this functionality to the entire PowerCube,

allowing you to change not only the FC settings but also the video transmitter channels and output power.

In order for the CORE PRO to detect the video transmitter, the CORE PRO must be equipped with Smart Audio

technology. You’re most likely in luck and as we’ve rolled this out on the CORE PRO’s way before we ever

made the video transmitters. Unfortunately, there’s no real way to know if your CORE PRO is compatible. The

first batch, 3rd batch and all subsequent batches are compatible, but it’s hard to know if your CORE PRO

supports Smart Audio without plugging in the video transmitter. If your CORE PRO doesn’t support Smart

Audio, you can either get a new one or open up a ticket with us to have it sent to one of our service stations

around the globe to have it revised for free.

Channel, Band and Power control

If your CORE PRO supports Smart Audio and the

TBS UNIFY PRO is plugged in, you will see the

“VIDEO TRANSMITTER” setting in the main OSD

menu:

The menu itself is very straightforward, allowing you

to choose Channel, Band and Output power. A HAM

Callsign is required to enter high power modes or

use frequencies outside the ISM band.