TBS Unify Pro HV 5.8GHZ VTX

Video Transmitter Pinout
TBS UNIFY PRO 5G8
Despite being plug and play with the TBS CORE , TBS CORE PNP PRO , PNP25, PNP50 - the UNIFY PRO can also
be directly soldered to cameras or custom power distribution boards. See the pinout below:
TBS UNIFY PRO 5G8 HV
The UNIFY PRO 5G8 HV comes with wires ready to be assembled into your own projects. Should you want to
connect it to TBS products such as the TBS CORE , TBS CORE PNP PRO, PNP25/PNP50, etc, you will need to
modify the camera pinout to match the VTx input socket. You will also need to remove the red wire from the
connector, to avoid voltage supplies fighting each other.
Connection to DIY drone build
Connection to TBS CORE products
6