TBS Tracer Manual



Specifications
Type:
Two-Way Remote Control System
Band:
2.4GHz band
RF power
25mw - 100mW selectable
Modulation:
TBS custom
Antenna:
TX: 1x omnidirectional dipole antenna
RX: 2x flexible t-style antenna
R/C Channels:
up to 12-channel digital stream outputs, standard 2.54mm servo connectors
Radio compatibility:
Any radio with JR-style bay or Mini-module bay. OpenTX recommended
Interface:
TX: RGB LED light, push button, configuration via CSRF
(TBS TANGO, OpenTX ect. ), WiFi
Failsafe:
Pre-set servo positions or stops outputting servo pulse - selectable in
configuration menu or via push button
Antenna connector:
Tx: Standard SMA
Rx: U.fl
Operating range:
15mi+/25km+
Input power:
Micro Tx: +3.5 to 12.6V
Nano Tx: +5 to 9V
Rx: +4.5V to 8.4V (down to 3.3V possible, but not recommended)
All reverse-polarity protected, compatible for 2s Lipo direct
Power consumption:
TX: 1.1W, at 25mW
Rx: 1W at 5V
Ports:
Nano RX: 2x Pin-headers for 1x BST and 2x CSRF or 4x Servo
Nano PWM version: 6x Servo connector
Working temperature:
0 - 40°C
Size:
Micro TX: 73 x 56 x 35 mm
Nano Rx: 11 x 8
Weight:
Tx: 38g
Rx: 3.2 grams incl. antennas

 


6
