TBS Tracer Manual

Emergency Update
If an OTA update for the receiver fails, it will no longer work. In this case you need to use the built-in
emergency update feature:
Hold the bind button
Power up the receiver
The led on the rx starts to flash rapidly
Release the button
Push and hold the button again
The led will start to blink in a double-patter
As soon as the led switches to rapid flashing again, you can release the button
When the pattern changes back to slow, single blinking the emergency update is finished
Now the receiver is working again and automatically turned on the bind mode. Now you can power up
your transmitter, start the binding and run the OTA update again
Manual written and designed by Kamikatze-fpv in cooperation with TBS
51