TBS Tracer Manual
Racing environment
When racing try to unify the power output across your peers.
Recommended settings:
● Max output power: 100mW
● Dynamic power: off
Factory reset
If you experience a strange behavior with your Tracer, a factory reset can help solve them.
The process is the same for all transmitters and receivers:
● Power up your device
● Navigate in to the transmitter or the receiver menu
● Under “General” you can find the “Factory reset” option
● When you started it, follow the instructions on your display/ radio
● When the reset is finished, you need to power cycle your device
If you did the reset for the receiver you need to rebind it by pushing the
Bind
button.
Check and adjust your settings after the power cycle. Everything will be set to default.
On the receiver the failsafe position must be taught again if you want to use it!
50