TBS Tracer Manual
Signal strength in Betaflight - BF < 4.1 and DJI OSD
If you use an older BetaFlight version or a new one but with a DJI HD system, you need to assign the LQ
sensor to a channel.
In the Tracer receiver channel mapping, assign LQ to an unused channel. If you set it up by LUA, you can
assign it to channel 1, even when you use the 8 channel mode of the Tracer.
In BetaFlight, set the assigned channel as
RSSI Channel
(AUX1 = channel 5, etc)
46