TBS Tracer Manual



LUA script or the CRSF menu work as well:
● Connect the Tracer Tx to your radio and power it up
● Navigate in the Tracer menu to WiFI/ General
● Hit  Scan  to search for available networks
● Under  SSID  you can select the found network
● Insert the password under  Password
● Click on  Connect to start the manual connection
● Done
OTA update of the WiFi Module
When your WiFi module is on FW 1.25 (not yet available), you can use the self-update feature:
● Connect your WiFi module to a hotspot with internet access
● Open the Tracer WiFI device by Agent X, Lua script or CRSF menu
● Under  General  you find  Update
● Hit Update and follow the instructions on the screen
● When the message disappears, the module is successfully updated
At the moment the self-update check will result in your module is up to date message no matter which
version you use!
OpenTX setup for Tracer
If you own a OpenTX radio, you need to set up your model like this:
Internal RF: off  and External RF: CRSF

Note: those settings need to be done on all models where you use your Tracer.
Using CRSF will give you the lowest possible latency from your stick to the drone and full telemetry back to
your radio.

 


34
