TBS Tracer Manual



Initiate the WiFi module

To use the Cloud functions, you need to initiate the WiFi module first:

● Download and unpack the firmware files for the WiFi module from TBS

● Connect the Tracer Tx to your radio and power it up

● Search for a new WiFi network like “TBS_XF_AP_xxxxxx”

● Connect your pc with this network. On Windows machines this can take up to one minute

● Open your browser and enter ip in the address bar: 192.168.4.1

● Click on

Select file 

and search for the unpacked firmware files you downloaded before



● Hit 

Update 

and wait for the website to reload

○ Do not shut down your radio during this

● Now you can see the WiFI module in your Tracer menu/ LUA script and Agent X

Here you can find the whole process as video

Connection to a WiFi hotspot

Once your WiFI module is initiated, you now can connect to your hotspot. The easiest way is to connect it

by the Web-ui:

● Connect the Tracer Tx to your radio and power it up

● Search for a new WiFi network like “TBS_XF_AP_xxxxxx”

● Connect your pc/ phone with this network. On Windows machines this can take up to one minute

● Open your browser and enter ip in the address bar: 192.168.4.1

● Open the 

WiFI 

tab

● Click on Scan to search for available networks

● Click on the name of the found network you want to connect to - the name will be entert for you

● Enter your password and hit Connect/ Disconnect

● When you refresh the page after a few seconds, you can see the IP address of the module

● Done



33

