TBS Tracer Manual



Receiver LED status indicator
Receiver LED indicators
Description
Solid green ▀▀▀
Link is up and running OK
Solid red ▀▀▀
No packages received from the transmitter and receiver is in
failsafe mode
Fast red blinking ■ ■ ■ ■
Receiver needs a update, confirmation on the tx is required
Slow green blinking ▀ ▀ ▀
Receiver is in binding mode
Fast green blinking ■ ■ ■ ■
Receiver bootloader active or firmware upgrade running
Green is flashing █ █ █
Diversity RX is in Find-mode (up to 1 min. delay between flashing)
Double green blinking ■ ■
■ ■
Authentication error. Rebind your receiver - more details

MyVTX
With the new MyVTX menu you can set all your VTx to the same channel, band and output power without
accessing all of them. This is useful if you are on a race with multiple drones and have to set them all to
the same channel. The channel will be set immediately as your drone powers up and binds to your
transmitter.
If you enable MyVtx, all other vtx settings will be overridden temporarily, until you disable it again.
Connect your vtx to the Tracer Rx by CRSF or Smart Audio, activate MyVtx and set the it up*

Settings
Description
Active
activate/ deactivate the global vtx settings
Band
Band settings, Race/ Low/ A/ B/ E/ Airwave/ User
Frequency
Channel/ Frequency
1 - 8/ 5620 - 5920
Power
VTx power level, 25/ 100/ 400/ max mW



24
