TBS Tracer Manual



Dynamic transmission power
The system can automatically choose the power level most suitable for the situation at hand. For instance,
if you fly close to the transmitter you normally only require minimal TX power and the system will
therefore switch to the lowest possible TX power level required to maintain a good up-link.
The maximum TX power level the system is allowed to use, can be defined by changing “Max Power” in the
configuration menu.


Transmitter LED status indicator
The RGB LED on the transmitter gives you at any moment an indication of your link status.
Transmitter LED sequence
Description
Pulsing 
Ready, trying to connect to receiver or no down-link established
Green ▀▀▀
Solid link
Blue ▀▀▀
OTA Update of the receiver is running
Slow blue blinking  ■ ■ ■ ■
Update confirmation required
Fast green flashing ■ ■ ■ ■
Transmitter bootloader active
Fast red flashing ■ ■ ■ ■
Warning, a message is shown on the LUA Script

 


23
