Team Black Sheep Crossfire RC System - Manual

FAQ

Some common and some special outlier questions for the CROSSFIRE system.

● TBS CROSSFIRE Seems not to work with Futaba T18SG

○ It required you to use an external battery to power the TBS CROSSFIRE

○ Go to Trainer port settings and select ACT, Student, and 8 Ch. or 12 Ch.

● Does the transmitter forget the receiver when I bind a new receiver

○ No. The receiver stores the serial number of the transmitter. Everything is based on this.

So you can bind as many receivers as you want.

● What happens if I have more than one receiver running at the time

○ We recommend running only one receiver at the time but if you like to, you can run more

than one receiver at the time. As the system is not designed for this use case some

features need to be disabled to make it work properly. Make sure both receivers run in the

same operation mode, 8 or 12 channel mode and both have telemetry disabled.

Manual written and designed by ivc.no in cooperation with TBS, redesigned and maintained by

kamikatze-fpv.de