Team Black Sheep Crossfire RC System - Manual

Wireless configuration with BetaFlight/ iNav by Bluetooth

With the serial passthrough function of the Bluetooth module (Standard TX only), you can connect to your

BetaFlight/ iNav Fc without a USB connection. For this to work, you need to connect a second connection

between the CROSSFIRE RX and the FC

Note:

This will only work while your CROSSFIRE is in the 150hz mode. As soon as the link switches to 50Hz, the

Bluetooth module stops sending serial data

BetaFlight/ iNav setup

Enable MSP for the UART and set the Baud Rate to57600. When you want to connect to the BetaFlight/ iNav

configurator, select the Com port of your pc and set the Speed to 57600baud as well.