Team Black Sheep Crossfire RC System - Manual

Attention

These Long Range Systems are capable of radio frequency transmissions and output power that may be

not allowed in your country.

Please always check your local RF legislation to set the frequency and output power according to

the regulation.

A general rule for RC aircrafts is that they must be controlled always under sight of view, check your RC

regulation to keep up to date with regulations.

Getting ready

Getting set up and ready to fly is a quick and simple task. In most cases plug&play when using TBS

equipment.

FAQ

If you got any questions after reading this manual you should visit the

TBS FAQ section

Note

This manual is written based on

CROSSFIRE FW 6.09 and WiFi 2.00

. If some functions are not available for

you, please update your CROSSFIRE to this (Beta) or a later version.

Updating

In order to update and configure your CROSSFIRE, you need the TBS Agent X, which you can download

from the TBS shop.

To update your CROSSFIRE, connect it to the USB port of the transmitter and run the update by Agent X.

The receiver will then get the update while the next binding (details can be found in the

receiver update

section)

For detailed instructions on how to use Agent X, have a look at the Agent X manual.